Search found 15 matches

by Etzitus
Mon Feb 20, 2012 11:20 am
Forum: Tech
Topic: b25 crank endfloat
Replies: 5
Views: 1301
Flag: Germany

Re: b25 crank endfloat

Hello backmarker1959,

you have a PM.

Regards

Rainer
by Etzitus
Sat Feb 18, 2012 5:56 pm
Forum: Tech
Topic: B50 clutch/gearbox questions
Replies: 18
Views: 1973
Flag: Germany

Re: B50 clutch/gearbox questions

Mh, the train on a B44 is: flywheel - inner ring main bearing - sprocket spacer - engine sprocket - rotor (with inner steel sleve) - washer - fixing nut. This clamped together with 60 ft/lb, which is already heavily. Sprocket will not move, because it´s splined. Rotormovement without the key? I don´...
by Etzitus
Sat Feb 18, 2012 3:12 pm
Forum: Tech
Topic: B50 clutch/gearbox questions
Replies: 18
Views: 1973
Flag: Germany

Re: B50 clutch/gearbox questions

Right. Here you have to use the key. But here's another thing because the key ensure the correct position of the ignition timing mark(s). And - pardon - he is used for nothing more, because due to the low mass of the rotor the rotor fixing is only managed over the pressure force of the rotor fixing ...
by Etzitus
Fri Feb 17, 2012 10:19 pm
Forum: Tech
Topic: B50 clutch/gearbox questions
Replies: 18
Views: 1973
Flag: Germany

Re: B50 clutch/gearbox questions

I guessing two : shered of key . 1. best solution : splinned mainshaft from PES, second solution : always - ALWAYS - !!! carryng at least one ore beter two spare Woodruff Keys in your pocket and the tools to do the replace along the roadside.....( my own version for many year ) Ahh, the myth of the...
by Etzitus
Thu Jan 26, 2012 7:01 pm
Forum: Suppliers and New Products
Topic: Sump Plate
Replies: 11
Views: 2751
Flag: Germany

Re: Sump Plate

Ok, this plate was designed differently - I first go for the stiffer construction and the magnetic bolt -, but my B44 VS is only street going and, tatata: has, as might be widely known, an engine shield. (Yes sir, there is enough place.) So I think that anyone to whom I'm over with the bike, has rea...
by Etzitus
Wed Jan 25, 2012 5:34 pm
Forum: Suppliers and New Products
Topic: Sump Plate
Replies: 11
Views: 2751
Flag: Germany

Re: Sump Plate

sump plate.jpg

You will not be able to use studs any more, so socket headed cap screws are provided.

Correctly or you have a lathe. For a more frequently used screw, I prefer iron bolts rather more than a windy thread in aluminum.

Regards

Rainer
by Etzitus
Fri Dec 02, 2011 10:32 am
Forum: Tech
Topic: Morgo flywheel (slugde trap) plug for B44 crank
Replies: 9
Views: 1375
Flag: Germany

Re: Morgo flywheel (slugde trap) plug for B44 crank

Hello Last night I removed the crankshaft, disassembled ist and cleaned the sludge trap. Large screwdriver and some heat. This is the result. Gruscht.jpg I need a new plug in any case. Out and back twice is it. Stopfen.jpg Thread Size: 1/2 " - 20 UNF So it's certainly Morgo HB10. Btw the sludge...
by Etzitus
Thu Dec 01, 2011 8:24 am
Forum: Tech
Topic: Morgo flywheel (slugde trap) plug for B44 crank
Replies: 9
Views: 1375
Flag: Germany

Re: Morgo flywheel (slugde trap) plug for B44 crank

Hello Gunnag,

if this is so, then I'm going to screw out the plug first and look for the thread. Thought that the thing would be easier and I can manage the clean up in one session. Now, it takes a little bit longer.

Best regards

Rainer
by Etzitus
Wed Nov 30, 2011 9:12 pm
Forum: Tech
Topic: Morgo flywheel (slugde trap) plug for B44 crank
Replies: 9
Views: 1375
Flag: Germany

Morgo flywheel (slugde trap) plug for B44 crank

Hello, I'm back with a new question :grin: . Which of the Morgo crank bungs (http://www.morgo.co.uk/bungs.html) is used for a B44 crank? From the shape I bet on HB10, but I'm not sure if it's the right thread. Yes, I have rang up Morgo, but the man to whom I was connected did´nt know anything accura...
by Etzitus
Mon Nov 28, 2011 12:33 pm
Forum: Tech
Topic: b25 oil pump
Replies: 5
Views: 927
Flag: Germany

Re: b25 oil pump

Hello backmarker1959,

you have a PN.

regards Rainer
by Etzitus
Fri Nov 25, 2011 11:36 pm
Forum: Tech
Topic: cast iron pump in B44
Replies: 14
Views: 2010
Flag: Germany

Re: cast iron pump in B44

Hello Norman, thank you for your informative writing. I know the "unit bible" from RR since their edition in 2000. Hence for this I store the iron cast pump in my parts pool. Now I will catch the opportunity to mount it. For this my question. New for me was the thing with the sumpholes. I ...
by Etzitus
Fri Nov 25, 2011 8:26 pm
Forum: Tech
Topic: cast iron pump in B44
Replies: 14
Views: 2010
Flag: Germany

Re: cast iron pump in B44

@ Mark I know that, but I do not need the other gears. What I need, if I need it, is the spindle and the corresponding feed gear as a pair. In the meantime, I make use of the things I have. @ Mr. Mike I agree with you. It is certainly not necessary to replace the pump, but I'm just have time, the op...
by Etzitus
Fri Nov 25, 2011 1:43 pm
Forum: Tech
Topic: cast iron pump in B44
Replies: 14
Views: 2010
Flag: Germany

Re: cast iron pump in B44

Hello, many thanks for your answers. @Mark: You right, they differ in the design of the teeth, but not in the dimensions. And the output of the B50 gears is higher because of the different teeth design. But I think, if the feeding output of my B44 gears design was high enough for the last 42 years i...
by Etzitus
Fri Nov 25, 2011 10:16 am
Forum: Tech
Topic: cast iron pump in B44
Replies: 14
Views: 2010
Flag: Germany

Re: cast iron pump in B44

Thank you for your friendly welcome and your answers. Mh, ok, from the beginnig. The zink alloy pump of my B44 engine works properly all over the years and it is still working properly. Now I have to do some work on the engine and the gear box (things like looking for the sludge trap etc.). No I hav...
by Etzitus
Thu Nov 24, 2011 11:28 pm
Forum: Tech
Topic: cast iron pump in B44
Replies: 14
Views: 2010
Flag: Germany

cast iron pump in B44

Hello to all, my name is Rainer. I come from Germany and live near Bonn. Since 1984 I´m driving a 1969 B44VS. Only road use. BSA B44 VS.jpg Now I have to do some engine overhaul and the opportunity to install a cast iron oil pump. I have a question for the third fastening point. Is it not easier to ...

Go to advanced search