www.b50.org

Johnq1

I can recommend Ben at Raysons exhausts, he will sand bend a pipe to your size and requirements

Johnq1

Most of John's b25/50 parts 'classicbikepartsuk.uk ' are copied from original or NOS items, some supplied by by myself and fit has never been an issue, a little dressing maybe or a polish to taste but never had a problem, he's a great guy to deal with ind will copy your parts in stainless which in t...

Johnq1

I can also recomend Ben at Raysons exhausts

Johnq1

Nice looking bike, I went with a motogadget m-unit to wire up everything, expensive but neat,

Johnq1

I have found a company that makes these mounts that are very near match to the original electronic box mounts and they were kind enough to send me three out as a sample, I was wondering if anyone would be interested in these. Cheers John, ps if enough people are interested I will try a bulk buy

Johnq1

Have a look at Micheal Waller on YouTube, he has a 280 conversion vid or try Roger at RTSRACINGPRODUCTS438@YAHOO.CO.UK. He does conversions.

Johnq1

The AMAL one is still available I think,check their website

Johnq1

Not being an engineer, who makes or repairs pumps for these as srm don't do one for my bike, or do I just live with it and drop the oil after trips??

Johnq1

Thanks for your kind comments jb amal side exit throttle allready on the way and set of venhill cables, just need to get out on it now

Johnq1

Couple more pics for frank

Johnq1

Bar clamps were an internet find and raise the bars slightly and convert from 7/8 to 1" so you can fit fatbars

Johnq1

Hand grenade tire valve dust caps for the B25 (as an aide-memoire) can I add stronger ankles

Johnq1

A stop start project and four years on its finally finished and nowhere to go

Johnq1

They are great racks and fit well

Johnq1

I would recommend zooming this picture to look at the jobs list on the blackboard, very special

Johnq1

Are these any good

Johnq1

I have some electronic box mount brackets and lid,, give me a day and Ile dig them out for a few beer tokens, pics to follow.

Johnq1

beesa71 wrote: ↑Tue Apr 21, 2020 8:35 am If John will excuse me; here’s a link re’ the exhaust system.

http://b50.org/phpBB2/viewtopic.php?f=2 ... ons#p64189

Regards.

Paul.

no problem All help appreciated

Johnq1

The exhaust system was sand bent by Ben at Raysons exhausts (It's loud) pic made McN when Raysons were featured a while back

Johnq1

Tank is by Holtworks in the UK

Johnq1

My b25 project has been stood a couple of months and yesterday was the Big first start day, anyway after the usual double checks of the timing and fuel I found it difficult to kick, on dropping the sump plate I got approx a litre of oil out, topped up again and the rest went well just fine timing an...

Johnq1

A pic of mine

Johnq1

Searched but no success may have to try plan b and pull mine (ooh er missus) plenty of tome at the moment

Johnq1

I am looking for someone to LEND me a b50/b25oif rear axle so I can use as a pattern to get some made in stainless, some possibly to suit paddock stands, if you can help let me know, TIA cheers John.

Johnq1

Almost there

Johnq1

[My project going on the road as soon as the lurgy goes away

Johnq1

Never had a problem with them, allways good service and communication and superb products, and worth the wait sometimes for that quality product,cheers John

Johnq1

I had a lozenge silencer built by lathejack and you won't find better as they don't exist, I've also had an MX style one built by Ben at Raysons exhausts. Again a superb piece of workmanship.

Johnq1

Can't find the oddie pins for my b25ss side panels, research has got me confused Anne the few I've found are way overpriced, can anybody recommend a good supplier an or the size please. Tia John

Johnq1

had this made by Ben at Raysons exhausts for my b25 special, he makes front pipes and silencers

Johnq1

Try Dragonfly or Baxter cycle parts,

Johnq1

Minety is correct Raysons sandbends in mild steel pipe for any bike his work is amazing and old school workshop a dream to visit ,worth seeking out if you need bespoke service, his next project is a bennelli 750 sei race system,

Johnq1

Got my bike back with my final exhaust system, very pleased with the results and got a tiny pic in McN

Johnq1

Classicbikepartsuk.uk for stainless parts do a sump guard,

Johnq1

John at classicpartsuk.uk make a stainless steel sump guard

Johnq1

All good, thanks Rickard

Johnq1

Try Mike Endean at Black cat wheels, did a great job on mine,

Johnq1

Just looking for recommendations for insurance companies for my b25ss special, who is the best for agreed value and price etc

Johnq1

The Sammy Miller fork brace/mudguard mount and a mudguard from Autocycle engineering in Dudley rolled to suit does the trick sorry not bolted up in this picture

Johnq1

Happy Birthday Young Man

Search found 79 matches