Star

Just some fun to show. Links, pics or movies.

Moderator: minetymenace

User avatar
minetymenace
Gerry1
Gerry1
Posts: 7430
Joined: Wed May 26, 2004 1:00 am
Location: On the edge of Salisbury Plain, England
Has thanked: 14 times
Been thanked: 50 times
Flag: England
Contact:

Re: Star

Post by minetymenace » Fri Jan 31, 2020 9:38 am

beat, I don't understand
beat wrote:new metric size bearings and bushings
<201 :roll:
There is no evidence to support the notion that life is serious.
Abyssinian Wire-Haired Tripehounds Gnash.

beat
>1400
>1400
Posts: 5541
Joined: Sun Jun 04, 2006 5:33 pm
Location: Switzerland
Has thanked: 0
Been thanked: 28 times
Flag: Switzerland

Re: Star

Post by beat » Fri Jan 31, 2020 10:04 pm

minetymenace wrote:
Fri Jan 31, 2020 9:38 am
new metric size bearings and bushings
yes, all the flywheel bearings are metric size now, - as they are smaller in outside diameter it needs bushings.
as I bought the flywheel in pieces and not balanced, and using a much shorter piston to compensate the 14 mm additional stroke:
this work is not made by myself, no, - it is done by Marcel Gerhard in Frauenfeld.
Gerhard Racing is a well known specialist for crankshafts and engines here around....

anyway:

The head
DSCN1646.jpeg
drilling the holes for the four long studs right trough ....
DSCN1648.jpeg
surching and preparing....
DSCN1649.jpeg
cuting space for the nut ....
DSCN1647.jpeg
newly four nuts from topside holding head and barrel in place ( like B50 )
DSCN1645.jpeg
checking flywheel and piston for clearance
<216 <216

beat <217

beat
>1400
>1400
Posts: 5541
Joined: Sun Jun 04, 2006 5:33 pm
Location: Switzerland
Has thanked: 0
Been thanked: 28 times
Flag: Switzerland

Re: Star

Post by beat » Sat Feb 01, 2020 8:30 pm

DSCN1650.jpeg
fitting new lightweight valves
DSCN1651.jpeg
big ports for the old Goldie now...
DSCN1653.jpeg
nice piston from Wössner
DSCN1655.jpeg
and go for measuring comp ratio
and unlucky, 8.2 : 1 is the result.
as I surch for around 9.5 : 1, the barrel has to be cut at the bottom by 1.7mm ...

<216
beat

User avatar
Jack Gifford
>540
>540
Posts: 551
Joined: Fri May 24, 2013 5:58 am
Location: Phelps, NY
Has thanked: 0
Been thanked: 6 times
Flag: United States of America

Re: Star

Post by Jack Gifford » Sun Feb 02, 2020 6:09 am

beat wrote:
Sat Feb 01, 2020 8:30 pm
... the barrel has to be cut at the bottom by 1.7mm ...
And... custom shorter pushrods?
... "Bigger ports"... Different head? Or did you "carve out" the ports?
"Motley" bike history: Horex 400, 1940 HD 45 FH, HD Baja 100, '49 Indian Scout 440, Victor 441 Roadster, H*nda TL125, Guzzi V50, H*nda FT500, 400-4, NX250
Aside from bikes: known as the "guru" of M/T hemi Pontiacs

beat
>1400
>1400
Posts: 5541
Joined: Sun Jun 04, 2006 5:33 pm
Location: Switzerland
Has thanked: 0
Been thanked: 28 times
Flag: Switzerland

Re: Star

Post by beat » Sun Feb 02, 2020 8:39 pm

hi Jack
Jack Gifford wrote:
Sun Feb 02, 2020 6:09 am
And... custom shorter pushrods?
... "Bigger ports"... Different head? Or did you "carve out" the ports?
yes, I think I have to make shorter pushrods. but how much shorter I will see when barrel is finely fit, same as head and cams.

about different head : Inlet is made wider by 4mm, exhaust I am scary to made because the ugly crack in there gos right trough to the insert.
I just hope this old head is holding the next season because our budget of 10 000.- Sfr. for this winter preparing is already dried out by the new Reiger Shocks and this engine parts.

unlucky there is a endless list of wishes but NO endless money in the pocket.... :werd

beat <203

beat
>1400
>1400
Posts: 5541
Joined: Sun Jun 04, 2006 5:33 pm
Location: Switzerland
Has thanked: 0
Been thanked: 28 times
Flag: Switzerland

Re: Star

Post by beat » Wed Feb 05, 2020 8:17 pm

DSCN1656.jpeg
barrel on the mill
DSCN1657.jpeg
cut off the feet gos faster than getting a higher piston....
next job is to shorten the pushrods to match the shorter barrel...
<216
beat

beat
>1400
>1400
Posts: 5541
Joined: Sun Jun 04, 2006 5:33 pm
Location: Switzerland
Has thanked: 0
Been thanked: 28 times
Flag: Switzerland

Re: Star

Post by beat » Sun Feb 09, 2020 8:43 pm

DSCN1663.jpeg
Pushrods shortened by 2.5 mm, - all is inside....
DSCN1664.jpeg
engine slowly fit in place....
<216

beat
>1400
>1400
Posts: 5541
Joined: Sun Jun 04, 2006 5:33 pm
Location: Switzerland
Has thanked: 0
Been thanked: 28 times
Flag: Switzerland

Re: Star

Post by beat » Thu Feb 13, 2020 9:27 pm

&lt;069 &lt;069

Engine is running !! ( Started by kickstarting, - no decompressor needed !! ) - and it comes by second kick !
but it is really hard to get it over TDC with this 650 ccm and 9.1 Comp Ratio, together with a new modern piston in a nicasyl coated barrel.

beat :grin: :grin: :grin:

User avatar
minetymenace
Gerry1
Gerry1
Posts: 7430
Joined: Wed May 26, 2004 1:00 am
Location: On the edge of Salisbury Plain, England
Has thanked: 14 times
Been thanked: 50 times
Flag: England
Contact:

Re: Star

Post by minetymenace » Fri Feb 14, 2020 9:00 am

Well done. :ok

Have you ever considered electric start on a BSA single beat?
There is no evidence to support the notion that life is serious.
Abyssinian Wire-Haired Tripehounds Gnash.

User avatar
Jack Gifford
>540
>540
Posts: 551
Joined: Fri May 24, 2013 5:58 am
Location: Phelps, NY
Has thanked: 0
Been thanked: 6 times
Flag: United States of America

Re: Star

Post by Jack Gifford » Sat Feb 15, 2020 5:59 am

Minety- are you joking? Or don't you read your own forums? :roll:
"Motley" bike history: Horex 400, 1940 HD 45 FH, HD Baja 100, '49 Indian Scout 440, Victor 441 Roadster, H*nda TL125, Guzzi V50, H*nda FT500, 400-4, NX250
Aside from bikes: known as the "guru" of M/T hemi Pontiacs

User avatar
minetymenace
Gerry1
Gerry1
Posts: 7430
Joined: Wed May 26, 2004 1:00 am
Location: On the edge of Salisbury Plain, England
Has thanked: 14 times
Been thanked: 50 times
Flag: England
Contact:

Re: Star

Post by minetymenace » Sat Feb 15, 2020 4:37 pm

Irony is so wasted on our American cousins....
There is no evidence to support the notion that life is serious.
Abyssinian Wire-Haired Tripehounds Gnash.

beat
>1400
>1400
Posts: 5541
Joined: Sun Jun 04, 2006 5:33 pm
Location: Switzerland
Has thanked: 0
Been thanked: 28 times
Flag: Switzerland

Re: Star

Post by beat » Sat Feb 15, 2020 10:02 pm

minetymenace wrote:
Fri Feb 14, 2020 9:00 am
Have you ever considered electric start on a BSA single beat?
well, - Motocross racing makes me feel 20 years younger, - so I do not waste any thinking about this.....

:lol: :lol: :lol:

starting to made my own Kill Switch today...
DSCN1665.jpeg
the housing, - a first go...
<216

User avatar
Jack Gifford
>540
>540
Posts: 551
Joined: Fri May 24, 2013 5:58 am
Location: Phelps, NY
Has thanked: 0
Been thanked: 6 times
Flag: United States of America

Re: Star

Post by Jack Gifford » Sun Feb 16, 2020 5:50 am

minetymenace wrote:
Sat Feb 15, 2020 4:37 pm
... Irony is so wasted on our American cousins...
The sarcasm emoticon was so wasted on minety... :roll:
"Motley" bike history: Horex 400, 1940 HD 45 FH, HD Baja 100, '49 Indian Scout 440, Victor 441 Roadster, H*nda TL125, Guzzi V50, H*nda FT500, 400-4, NX250
Aside from bikes: known as the "guru" of M/T hemi Pontiacs

Post Reply