Laser cut stainless parts

Here You can ad suppliers and new parts.

Moderator: minetymenace

Post Reply
Johnq1
>80
>80
Posts: 87
Joined: Fri Jun 09, 2017 8:25 pm
Location: Leyland

Laser cut stainless parts

Post by Johnq1 »

After commissioning a couple of parts from John at classicpartsuk.uk I thought I might introduce them to the forum (apologies admin if this is not aĺowed) they supply laser cut stainless parts for bsa and other makes and will copy your old scruffy parts if you supply a pattern, these parts need to be dressed and then either painted or polished, alternatively could be sandblasted to look like a cad finish, check him out they were a pleasure to deal with, cheers John.
User avatar
minetymenace
Gerry1
Gerry1
Posts: 8068
Joined: Wed May 26, 2004 1:00 am
Location: On the edge of Salisbury Plain, England
Contact:

Re: Laser cut stainless parts

Post by minetymenace »

How about some photos and/link to web page?

Don't worry if "it is not allowed" you are an unruly lot, and if your mothers didn't manage to discipline you, we have no chance. There aren't many important rules and except for Rule 6, and most people seem to break them anyway, which keeps Rickard and I so busy that it has prevented us becoming the millionaires once predicted by the oracle of Delphi. :werd Write what you like Johnq1, in reality nobody gives or takes offence on this forum.
There is no evidence to support the notion that life is serious.
Abyssinian Wire-Haired Tripehounds Gnash.
Johnq1
>80
>80
Posts: 87
Joined: Fri Jun 09, 2017 8:25 pm
Location: Leyland

Re: Laser cut stainless parts

Post by Johnq1 »

Classic Bike Parts this is my first attempt at a link hope this helps, these parts have been slightly polished and dressed.

Edit by MM: Close, but never fear the moderator is here! Maybe John could put a reciprocal link on his web site?
20180429_134659.jpg
20180429_134741_001.jpg
20180429_134907.jpg
Johnq1
>80
>80
Posts: 87
Joined: Fri Jun 09, 2017 8:25 pm
Location: Leyland

Re: Laser cut stainless parts

Post by Johnq1 »

THANKS Minety, I've mentioned it to John

B50.org will be given a link on John's website,
Post Reply