L P Williams

Here You can ad suppliers and new parts.

Moderator: minetymenace

Post Reply
User avatar
SteveS
>480
>480
Posts: 481
Joined: Mon Jul 10, 2006 8:28 pm
Location: Nuneaton, Warks. U.K.
Has thanked: 0
Been thanked: 5 times
Flag: England

L P Williams

Post by SteveS » Thu Feb 18, 2010 8:25 pm

Although L P Williams are primarily specialists in Triumph spares for 500, 650 and 750 twins & Triples, because of the commonality between the Triumph and BSA ranges during the last years of BSA they hold a fair bit of stock that will suit the B50 and B25 OIF models - mainly cycle parts.

The site has been revamped and the search function is excellent - based on BSA/Triumph part numbers.

Prices on the parts I have required has been very reasonable and quality has also been good

http://www.triumph-spares.co.uk/

Regards Steve
Steve Sewell

User avatar
Sprint955
>10
>10
Posts: 16
Joined: Sat Feb 02, 2013 11:10 pm
Location: Glasgow
Has thanked: 0
Been thanked: 0
Flag: Great Britain

Re: L P Williams

Post by Sprint955 » Thu Jul 23, 2015 11:43 am

Can vouch for L P Williams,

good service and good kit. You get what you pay for, use them for my Bonnie and have not been let down.

User avatar
kommando
>1400
>1400
Posts: 1849
Joined: Mon May 24, 2004 8:41 pm
Location: Scotland
Has thanked: 4 times
Been thanked: 30 times
Flag: Ireland

Re: L P Williams

Post by kommando » Tue Jan 05, 2016 2:03 pm

I use their progressive front fork springs for the T120 69/70 on the shuttle valve front forks on a B44 SS, seem to work well.

Bigden28
>100
>100
Posts: 118
Joined: Thu Jan 30, 2014 2:04 pm
Location: Boosbeck, near Middlesbrough
Has thanked: 0
Been thanked: 0

Re: L P Williams

Post by Bigden28 » Tue Jan 05, 2016 7:01 pm

I use them for my T160 bits and advice. Top notch. They do a great non return valve which I'm sure could be adapted for the BSA singles. It works a treat on the T160.

Post Reply