Sump Plate

Here You can ad suppliers and new parts.

Moderator: minetymenace

User avatar
Mark Cook
>1400
>1400
Posts: 4752
Joined: Fri Sep 10, 2004 8:45 pm
Location: CCM Britain HQ Goldthorpe South Yorkshire
Flag: England
Contact:

Sump Plate

Postby Mark Cook » Thu Jan 12, 2012 6:46 pm

We now do a new sump plate kit that addresses all the issues with the cast item that Rickard loves so much ;-)

E67M.jpg


Mark

User avatar
Grouty
>600
>600
Posts: 609
Joined: Sun Aug 08, 2004 4:53 pm
Location: S.W. England

Re: Sump Plate

Postby Grouty » Fri Jan 13, 2012 1:11 am

OOOH ..... that is sooo much better.
All I need to do is make a new bash plate for the CCM and I reckon one of those is on the cards. The old bash plate is showing slight signs of age !!!
Bugger ... just remembered I need to make two. Best I find some annealable plate soon then.

User avatar
steve m
>1400
>1400
Posts: 2390
Joined: Sun May 06, 2007 3:22 am
Location: melbourne, australia

Re: Sump Plate

Postby steve m » Fri Jan 13, 2012 7:43 am

that looks nice Mark.
just asking, i'm sure others will want to know.
so it's alloy?
has a magnet in the drain plug?
you can still use the standard B50 bash plate?

steve

User avatar
Mark Cook
>1400
>1400
Posts: 4752
Joined: Fri Sep 10, 2004 8:45 pm
Location: CCM Britain HQ Goldthorpe South Yorkshire
Flag: England
Contact:

Re: Sump Plate

Postby Mark Cook » Fri Jan 13, 2012 2:54 pm

Thank Ian.

Ok then Steve,
The sump plate is made from an aluminium alloy, and I hope will still fit under the original bash plate.
The bolt is magnetic, and I hope the position will cause less injuries to whom ever you land on!
You will not be able to use studs any more, so socket headed cap screws are provided.

Any more questions please feel free to ask.

Mark

nopdog
>140
>140
Posts: 145
Joined: Mon Nov 21, 2011 5:38 am
Location: BAWLEY POINT NSW AUSTRALIA
Flag: Australia
Contact:

Re: Sump Plate

Postby nopdog » Tue Jan 24, 2012 6:23 am

Hi Mark
I am not complaining as any spare parts are good parts if you get my drift but.
I ordered one through CCM late last year and all I got was the sump plate with the magnetic bolt, as my existing gauze plate is part of the sump plate I could not use it. So I tried to order just the gauze plate locally and was sent a ratty old sump plate with gauze attached. Could you please supply the part number or numbers for the complete unit as I would like three to be sent to Aust.
Best Regards
Simon
Ps I would have sent this as a private message but haven't quite worked it out.

Edit by MM...To send a private message, click on the PM button (looks like a key hole and the letters "PM" in a box, next to the send him an e-mail envelope) in Mark's post (under Mark's name to the right of his scrawl), another window will open, type your worst and press send....simples

User avatar
b50root
Site Admin
Site Admin
Posts: 3251
Joined: Mon May 24, 2004 12:44 pm
Location: Malmö Scania Sweden
Flag: Scania Sweden
Contact:

Re: Sump Plate

Postby b50root » Tue Jan 24, 2012 7:13 am

Edit by MM...To send a private message, click on the PM button (looks like a key hole and the letters "PM" in a box, next to the send him an e-mail envelope) in Mark's post (under Mark's name to the right of his scrawl), another window will open, type your worst and press send....simples

And the message will remain in the outbox until Mark reads it.

Rickard

Etzitus
>10
>10
Posts: 15
Joined: Mon Oct 10, 2011 4:38 pm
Location: Bonn, Germany
Flag: Germany

Re: Sump Plate

Postby Etzitus » Wed Jan 25, 2012 5:34 pm

sump plate.jpg

You will not be able to use studs any more, so socket headed cap screws are provided.

Correctly or you have a lathe. For a more frequently used screw, I prefer iron bolts rather more than a windy thread in aluminum.

Regards

Rainer

User avatar
Mark Cook
>1400
>1400
Posts: 4752
Joined: Fri Sep 10, 2004 8:45 pm
Location: CCM Britain HQ Goldthorpe South Yorkshire
Flag: England
Contact:

Re: Sump Plate

Postby Mark Cook » Wed Jan 25, 2012 7:17 pm

Oh well, the whole point of the design was that nothing stuck out. Just imagine the damage you will do when you run someone over :cry:

User avatar
Grouty
>600
>600
Posts: 609
Joined: Sun Aug 08, 2004 4:53 pm
Location: S.W. England

Re: Sump Plate

Postby Grouty » Thu Jan 26, 2012 12:00 am

That would last about 60 seconds on the CCM before something wiped out those lovely looking fixings.
I suppose sleeping policemen would appreciate it ! Not a problem for road use though.

Etzitus
>10
>10
Posts: 15
Joined: Mon Oct 10, 2011 4:38 pm
Location: Bonn, Germany
Flag: Germany

Re: Sump Plate

Postby Etzitus » Thu Jan 26, 2012 7:01 pm

Ok, this plate was designed differently - I first go for the stiffer construction and the magnetic bolt -, but my B44 VS is only street going and, tatata: has, as might be widely known, an engine shield. (Yes sir, there is enough place.) So I think that anyone to whom I'm over with the bike, has really other problems as my protruding sump plate screws.

regards

Rainer

User avatar
Mark Cook
>1400
>1400
Posts: 4752
Joined: Fri Sep 10, 2004 8:45 pm
Location: CCM Britain HQ Goldthorpe South Yorkshire
Flag: England
Contact:

Re: Sump Plate

Postby Mark Cook » Fri Jan 27, 2012 12:11 pm

Sorry I was just teasing, you do have lovely nuts :oops:

Mark

User avatar
rhino
<1100
<1100
Posts: 1103
Joined: Tue Nov 11, 2008 8:40 am
Location: lancashire

Re: Sump Plate

Postby rhino » Fri Jan 27, 2012 8:15 pm

You say that to all the boys. Tart :laugh


Return to “Suppliers and New Products”

Who is online

Users browsing this forum: No registered users and 3 guests