Bsa b44 endure high level exoust pipe

Moderator: minetymenace

Brickie
1-10
1-10
Posts: 5
Joined: Tue Nov 15, 2016 9:53 pm
Location: Between Leeds & Skipton Yorkshire
Flag: England

Bsa b44 endure high level exoust pipe

Postby Brickie » Sat Feb 10, 2018 10:56 pm

Could someone please tell me where I can get an exhoust pipe that will fit so I don't have to waste another seventy plus pounds.
Thanks very much.
Brickie..

User avatar
kommando
>1400
>1400
Posts: 1631
Joined: Mon May 24, 2004 8:41 pm
Location: Scotland
Flag: Ireland

Re: Bsa b44 endure high level exoust pipe

Postby kommando » Sun Feb 11, 2018 9:46 pm

What year as it varies in shape, easiest to find suits the peanut silencer but the Armours version is too short but they refuse to accept it's their problem, according to them my B44 is too long :roll: .

Brickie
1-10
1-10
Posts: 5
Joined: Tue Nov 15, 2016 9:53 pm
Location: Between Leeds & Skipton Yorkshire
Flag: England

Re: Bsa b44 endure high level exoust pipe

Postby Brickie » Mon Feb 12, 2018 8:00 pm

Thanks very much Kommandom mine came from Armours but it was too long, thought it might be a generic pipe so cut to correct length then realised none of the bends fit.
Thanks Brickie

User avatar
kommando
>1400
>1400
Posts: 1631
Joined: Mon May 24, 2004 8:41 pm
Location: Scotland
Flag: Ireland

Re: Bsa b44 endure high level exoust pipe

Postby kommando » Mon Feb 12, 2018 11:42 pm

They will say your B44 is not standard and no one has ever complained of it fitting before. Will post a link tomorrow to a source, the place I bought mine off no longer stocks them.

User avatar
kommando
>1400
>1400
Posts: 1631
Joined: Mon May 24, 2004 8:41 pm
Location: Scotland
Flag: Ireland

Re: Bsa b44 endure high level exoust pipe

Postby kommando » Tue Feb 13, 2018 2:09 pm

Try here

http://www.progressiveclassicproducts.c ... sau-s.html

Listed as Stainless but he has none in stock but has them chromed to suit peanut silencer.

Pity he has this left on his website but has non in stock

Stainless Steel Pipes Guide - all 1.2mm wall thickness
make model tube diameter C.L.D.* additional information price
BSA Unit Single 1 1/4" 6" Suaged to 1 3/8" £85
BSA Unit Single 1 3/8" 5" To suit shorter barrel; B25,C15 £85
BSA Unit Single 1 1/2" 5" Shorter barrel with opened-out port £85
BSA Unit Single 1 3/8" 6" To suit longer barrel; B40,B44 £85
BSA Unit Single 1 1/2" 6" Tucks in tight to barrel £85
BSA Unit Single 1 5/8" 5 1/2" £85
Triumph Cub 1 1/4" 4" 1 3/8" available to order £85
Triumph Cub 1 1/4" 4" Short to fit forward silencer £80
Triumph Trophy 1 1/4" 6 1/2" Rigid £85
Triumph Trophy 1 3/8" 6" Swinging arm £85
* centre-line-diameter of first bend

Brickie
1-10
1-10
Posts: 5
Joined: Tue Nov 15, 2016 9:53 pm
Location: Between Leeds & Skipton Yorkshire
Flag: England

Re: Bsa b44 endure high level exoust pipe

Postby Brickie » Tue Feb 13, 2018 10:50 pm

Thanks very much kommando, just put the hacksaw across it.
Will weld it and see how it looks if ok I will get it chromed, about 60 pounds.
If not I will contact your link.
Thank you very much for your help.

Brickie
1-10
1-10
Posts: 5
Joined: Tue Nov 15, 2016 9:53 pm
Location: Between Leeds & Skipton Yorkshire
Flag: England

Re: Bsa b44 endure high level exoust pipe

Postby Brickie » Tue Feb 13, 2018 11:00 pm

Hi kommando forgot to say I will not bother with the manufacturer.
It's obvious that you can't deal with someone who is all ways right.

User avatar
minetymenace
Gerry1
Gerry1
Posts: 6903
Joined: Wed May 26, 2004 1:00 am
Location: Between Reading and Newbury, England
Flag: England
Contact:

Re: Bsa b44 endure high level exoust pipe

Postby minetymenace » Wed Feb 14, 2018 12:49 am

Hi Brickie <135 to the forum (sorry for the late welcome!)

Would you update your profile and let everyone know roughly where in Blighty you are please?
Abyssinian Wire-Haired Tripehounds Gnash.

Brickie
1-10
1-10
Posts: 5
Joined: Tue Nov 15, 2016 9:53 pm
Location: Between Leeds & Skipton Yorkshire
Flag: England

Profile

Postby Brickie » Wed Feb 14, 2018 6:51 pm

Thanks mightymince hope this is ok,
Brickie.


Return to “Requests”

Who is online

Users browsing this forum: No registered users and 1 guest