Clutch wheel

Here we can talk about the P92

Moderator: minetymenace

Post Reply
User avatar
b50root
Site Admin
Site Admin
Posts: 3327
Joined: Mon May 24, 2004 12:44 pm
Location: Malmö Scania Sweden
Contact:

Clutch wheel

Post by b50root »

It says 48 Teeth Original B50 is 52.


Image

Drawing: 15x20 dwgs/007.pdf

Rickard
Last edited by b50root on Mon Jun 05, 2006 6:09 pm, edited 3 times in total.
nebrer on EBAY
nebrer at skype ( http://www.skype.com )
B4450Paul
>60
>60
Posts: 70
Joined: Wed Jun 01, 2005 9:25 pm
Location: W. coast Canada

Post by B4450Paul »

is it using larger chain size ?
paul
CDB50MX
>220
>220
Posts: 228
Joined: Tue Nov 16, 2004 12:27 am
Location: Whittier , Southern California ,USA

Post by CDB50MX »

The P92 pre prototype motor that I have does have the primary sprocket and chain wheel using a different chain than B50 .
Mike
User avatar
JB
>520
>520
Posts: 523
Joined: Tue Jun 15, 2004 8:32 am
Location: Devon, England

Post by JB »

That's interesting Mike, I wonder if it's the 7/16 duplex chain that was fitted to the Triumph T160 Trident if so that would have a similar strength to a 3/8 pitch triple row chain!! If it is the same chain you will struggle to find a replacement as Renolds only manufactured one batch, Jaguar cars were also going to use that size for a camchain but decided not to in the end so no more got made.

John
CDB50MX
>220
>220
Posts: 228
Joined: Tue Nov 16, 2004 12:27 am
Location: Whittier , Southern California ,USA

Post by CDB50MX »

John,
What I may have to do to assemble this motor is put a B50 sprocket and NEB alloy clutch on it , as it did not come with a primary chain to fit the P92 parts .
Mike
Post Reply