ccm oiling coversion
Moderator: minetymenace
Forum rules
Please write in easy English so everybody understand.
Please write in easy English so everybody understand.
ccm oiling coversion
In the tech pages there is a conversion to what they call a CCM oiling conversion,,put an outlet with hose where the oil gauge should be and connect to the rocker feed pipe,has anyone done this ?, does it actually provide better oiling .
-
Ian Hingley
- >1400
- Posts: 2150
- Joined: Sat Jun 30, 2007 2:50 pm
- Location: Bristol, UK
Re: ccm oiling coversion
Hi baja
Loads of people have done this. Feed to the rockers is now from the clean, pressure side of the system rather than the return side.
Mark Cook (click the CCM-Britain icon on the above right) will have all the bits in stock.
Ian
Loads of people have done this. Feed to the rockers is now from the clean, pressure side of the system rather than the return side.
Mark Cook (click the CCM-Britain icon on the above right) will have all the bits in stock.
Ian
66 BSA Victor Enduro, 72 BSA Lightning, 62 BSA B40 trials, 2015 Truimph Street Twin, 89 H*nda Bros 650, 2000 Aprilia Moto 6.5 Starck
-
Chris Pellett
- >1000
- Posts: 1062
- Joined: Mon Oct 11, 2004 4:18 pm
- Location: Sussex
- Contact:
Re: ccm oiling coversion
Might not be good for the 250 though which requires all the pressure it can get for the shell big end
Re: ccm oiling coversion
spot on chris,everyone just loves to depart from standard,then wonder why things go wrong if it needed it im sure bsa would have done it. regards midgie.Chris Pellett wrote:Might not be good for the 250 though which requires all the pressure it can get for the shell big end