Dellorto 34 mm PHBE full jetting specs

Some words about this forum

Moderator: minetymenace

Post Reply
iffyb50
1-10
1-10
Posts: 7
Joined: Sun May 12, 2013 1:58 am
Location: Nanoose Bay, B.C. Canada.

Dellorto 34 mm PHBE full jetting specs

Post by iffyb50 »

Has anyone sorted the jetting for this set-up? 71 B50 570cc CCM head. Help, I am hopelessly lost. Thanks.
User avatar
SteveS
>680
>680
Posts: 688
Joined: Mon Jul 10, 2006 8:28 pm
Location: Nuneaton, Warks. U.K.

Re: Dellorto 34 mm PHBE full jetting specs

Post by SteveS »

Hi

Sorry you didn't get any satisfactory responses in the Tech section.

I've just done a search on Google and came up with the following thread:

Carbs

There is a forum user 'Andrew' who refers to the carb you are trying to set up. I don't know if 'Andrew' still frequents the forum but it may be worth trying to contact him by 'Private Message'.

Also worthwhile contacting Mark Cook of PES (Performance Engineering Services UK) as he sells the DELLORTO PHBE 34 BD so he should be able to provide suitable jets etc. for your requirements.

I guess you have already contacted Dellorto stockists in Canada for guidance?
Steve Sewell
iffyb50
1-10
1-10
Posts: 7
Joined: Sun May 12, 2013 1:58 am
Location: Nanoose Bay, B.C. Canada.

Re: Dellorto 34 mm PHBE full jetting specs

Post by iffyb50 »

Thanks Steve, I will try your suggestions. I don't know about Dellorto in Canada, I have been using Eurocarb for parts.
Post Reply