34mm mikuni on a b50mx

Some words about this forum

Moderator: minetymenace

Post Reply
Goldstar@63
1-10
1-10
Posts: 2
Joined: Tue Oct 11, 2022 3:46 am
Location: Mackay, North Queensland. Australia.

34mm mikuni on a b50mx

Post by Goldstar@63 »

Hi all. first post.Has anybody done this install.If so could you give me jetting numbers to start with.thanks.
User avatar
minetymenace
Gerry1
Gerry1
Posts: 8010
Joined: Wed May 26, 2004 1:00 am
Location: On the edge of Salisbury Plain, England
Contact:

Re: 34mm mikuni on a b50mx

Post by minetymenace »

<135 To the forum Goldstar@63 <135

Would you update your profile and add a rough location to let everyone know roughly where in the world you are please?

Have you tried using the search function (top right of your screen)? It come up with quite a few results....
There is no evidence to support the notion that life is serious.
Abyssinian Wire-Haired Tripehounds Gnash.
Goldstar@63
1-10
1-10
Posts: 2
Joined: Tue Oct 11, 2022 3:46 am
Location: Mackay, North Queensland. Australia.

Re: 34mm mikuni on a b50mx

Post by Goldstar@63 »

hi.i live in mackay north queensland australia.member of british motorcycles
owners asso. of mackay.given the job of restoring a b50mx donated to the club.bikes i have .60 super rocket.61 dbd34 catalina.51 zb33.cheers ian.
mlb50
>280
>280
Posts: 280
Joined: Wed Jun 25, 2014 4:25 am
Location: Perth, West Australia

Re: 34mm mikuni on a b50mx

Post by mlb50 »

Your in luck. MikuniOz in Townsville has all the stuff you need to fit a VM34 to a B50. I know coz I just ordered one.

The carby is $165 and you select the British 500 Single jet kit $59. They do state that this may not be 100% suitable but will get it going and then you can change out jets accordingly. At the bottom end, the Pilot is the most likely item, then the needle itself for the mid-range.

Phone up MikuniOz they're helpful guys.
B50 @ 10:1 - what's a leg between friends?
Post Reply